Construction and building fall arrest protection

Construction using safety fall arrester

anchorstrap — Thu, 17 Oct 2019 04:01:20 +0200

We are in the office building, separated by glass, looking at the scenery in the distance, very beautiful, but if you are outside the office building and cleaning it outside the glass, the first feeling of looking down may be Fear, wearing a fall arrester can play a certain role in people's psychology.

The self-safe fall arrester and safety harness with lanyard can also protect the safety of the construction workers. When the operation is completed, people need to enter the ground. In the process of slow decline, the fall arrester will not have resistance to people's decline, but if Unfortunately, the anti-drop device can lock itself in time to prevent the worker from falling down. At the same time, it can also provide time for people's rescue work.

For ordinary people, the high-altitude fall arrester is only a protective tool, but for the high-altitude workers, the fall arrester from hoater is an important tool for life safety, so it is very important to choose a good fall arrester.

In the process of building the airport, it can prevent the danger of falling heavy objects and prevent the construction workers from falling.

First, the aircraft is flying in the sky, its volume is large, and the internal volume of the airport carrying the aircraft is also very large. During the construction process, when the high-altitude construction is carried out, the anti-drop device is often needed to increase the safety of the construction workers. Guarantee.

Second, when constructing the top of the airport, it is not only necessary for the construction personnel to carry out construction on the ground, but also to carry out the lifting or lowering lifting work of the building. When the descending is used, the use of the fall arrester can make the lifting work more secure.

Strict requirements for seat belts

anchorstrap — Wed, 28 Aug 2019 04:44:57 +0200

The national standards for seat belts have strict requirements for the use and storage of seat belts as follows:

(1) Seat belts should be hung low and low, pay attention to prevent swing collision. For the use of long ropes of more than 3 m, buffers should be added, except for the slings used for self-locking hooks. (2) The damper, differential speed device and self-locking hook can be used in series.

(3) It is not allowed to knot the rope. It is also not allowed to hang the hook directly on the safety rope and should be hung on the connecting ring.

(4) The various parts on the seat belt shall not be arbitrarily removed. Pay attention to the rope cover when replacing the new rope.

(5) After the seat belt has been used for two years, it will be tested once according to the quantity purchase. The rod is subjected to a static load test and stretched by 5 mm at a tension of 2 206 N. If it is not broken, it can be used continuously. When the seat belt impact test is suspended, the free fall test is carried out with a weight of 80 kg. If it is not broken, the safety belt can be used continuously. For the sampled sample, the safety rope must be replaced before continuing to use.

(6) When using frequent ropes, it is necessary to perform visual inspection frequently. When abnormalities are found, the new ropes should be replaced immediately.

Hoater always offer safety harness with lanyard,that's one of my business partner.And it will continue for a long time.

Čestitamo

anchorstrap — Wed, 28 Aug 2019 04:35:11 +0200

Ukoliko možete da pročitate ovaj članak, uspešno ste se registrovali na Blog.rs i možete početi sa blogovanjem.